epagris/FreeRTOS-Kernel
1
0
Fork 1
mirror of https://github.com/FreeRTOS/FreeRTOS-Kernel.git synced 2025-11-04 11:09:01 +01:00
Code Issues Packages Projects Releases Wiki Activity
FreeRTOS-Kernel/portable/GCC/ARM_CM3_MPU/portmacro.h
Gaurav-Aggarwal-AWS 11d0caa614
Fix the context array size for MPU ports (#1230) 
Fix the context array size for MPU ports

Ensure the saved context location falls within the reserved context area
rather than overlapping with the next MPU_SETTINGS structure member.

This never caused a problem because actual read/write operations
start from one word before the saved context location.

Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
2025-01-25 13:34:03 +05:30

396 lines
15 KiB
C
Raw Blame History

/*
* FreeRTOS Kernel <DEVELOPMENT BRANCH>
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
/* *INDENT-OFF* */
#ifdef __cplusplus
extern "C" {
#endif
/* *INDENT-ON* */
/*-----------------------------------------------------------
* Port specific definitions.
*
* The settings in this file configure FreeRTOS correctly for the
* given hardware and compiler.
*
* These settings should not be altered.
*-----------------------------------------------------------
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
#if ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_16_BITS )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#elif ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_32_BITS )
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
* not need to be guarded with a critical section. */
#define portTICK_TYPE_IS_ATOMIC 1
#else
#error configTICK_TYPE_WIDTH_IN_BITS set to unsupported tick type width.
#endif
/*-----------------------------------------------------------*/
/* MPU specific constants. */
#define portUSING_MPU_WRAPPERS 1
#define portPRIVILEGE_BIT ( 0x80000000UL )
#define portMPU_REGION_READ_WRITE ( 0x03UL << 24UL )
#define portMPU_REGION_PRIVILEGED_READ_ONLY ( 0x05UL << 24UL )
#define portMPU_REGION_READ_ONLY ( 0x06UL << 24UL )
#define portMPU_REGION_PRIVILEGED_READ_WRITE ( 0x01UL << 24UL )
#define portMPU_REGION_PRIVILEGED_READ_WRITE_UNPRIV_READ_ONLY ( 0x02UL << 24UL )
#define portMPU_REGION_CACHEABLE_BUFFERABLE ( 0x07UL << 16UL )
#define portMPU_REGION_EXECUTE_NEVER ( 0x01UL << 28UL )
#define portSTACK_REGION ( 3UL )
#define portGENERAL_PERIPHERALS_REGION ( 4UL )
#define portUNPRIVILEGED_FLASH_REGION ( 5UL )
#define portPRIVILEGED_FLASH_REGION ( 6UL )
#define portPRIVILEGED_RAM_REGION ( 7UL )
#define portFIRST_CONFIGURABLE_REGION ( 0UL )
#define portLAST_CONFIGURABLE_REGION ( 2UL )
#define portNUM_CONFIGURABLE_REGIONS ( ( portLAST_CONFIGURABLE_REGION - portFIRST_CONFIGURABLE_REGION ) + 1 )
#define portTOTAL_NUM_REGIONS_IN_TCB ( portNUM_CONFIGURABLE_REGIONS + 1 ) /* Plus one to make space for the stack region. */
typedef struct MPU_REGION_REGISTERS
{
uint32_t ulRegionBaseAddress;
uint32_t ulRegionAttribute;
} xMPU_REGION_REGISTERS;
typedef struct MPU_REGION_SETTINGS
{
uint32_t ulRegionStartAddress;
uint32_t ulRegionEndAddress;
uint32_t ulRegionPermissions;
} xMPU_REGION_SETTINGS;
#if ( configUSE_MPU_WRAPPERS_V1 == 0 )
#ifndef configSYSTEM_CALL_STACK_SIZE
#error configSYSTEM_CALL_STACK_SIZE must be defined to the desired size of the system call stack in words for using MPU wrappers v2.
#endif
typedef struct SYSTEM_CALL_STACK_INFO
{
uint32_t ulSystemCallStackBuffer[ configSYSTEM_CALL_STACK_SIZE ];
uint32_t * pulSystemCallStack;
uint32_t * pulTaskStack;
uint32_t ulLinkRegisterAtSystemCallEntry;
} xSYSTEM_CALL_STACK_INFO;
#endif /* #if ( configUSE_MPU_WRAPPERS_V1 == 0 ) */
/*
* +------------------------------+-------------------------------+-----+
* | CONTROL, r4-r11, EXC_RETURN | PSP, r0-r3, r12, LR, PC, xPSR | |
* +------------------------------+-------------------------------+-----+
*
* <-----------------------------><-------------------------------><---->
* 10 9 1
*/
#define MAX_CONTEXT_SIZE ( 20 )
/* Size of an Access Control List (ACL) entry in bits. */
#define portACL_ENTRY_SIZE_BITS ( 32U )
/* Flags used for xMPU_SETTINGS.ulTaskFlags member. */
#define portSTACK_FRAME_HAS_PADDING_FLAG ( 1UL << 0UL )
#define portTASK_IS_PRIVILEGED_FLAG ( 1UL << 1UL )
typedef struct MPU_SETTINGS
{
xMPU_REGION_REGISTERS xRegion[ portTOTAL_NUM_REGIONS_IN_TCB ];
xMPU_REGION_SETTINGS xRegionSettings[ portTOTAL_NUM_REGIONS_IN_TCB ];
uint32_t ulContext[ MAX_CONTEXT_SIZE ];
uint32_t ulTaskFlags;
#if ( configUSE_MPU_WRAPPERS_V1 == 0 )
xSYSTEM_CALL_STACK_INFO xSystemCallStackInfo;
#if ( configENABLE_ACCESS_CONTROL_LIST == 1 )
uint32_t ulAccessControlList[ ( configPROTECTED_KERNEL_OBJECT_POOL_SIZE / portACL_ENTRY_SIZE_BITS ) + 1 ];
#endif
#endif
} xMPU_SETTINGS;
/* Architecture specifics. */
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 8
#define portDONT_DISCARD __attribute__( ( used ) )
/*-----------------------------------------------------------*/
/* SVC numbers for various services. */
#define portSVC_START_SCHEDULER 100
#define portSVC_YIELD 101
#define portSVC_RAISE_PRIVILEGE 102
#define portSVC_SYSTEM_CALL_EXIT 103
/* Scheduler utilities. */
#define portYIELD() __asm volatile ( " SVC %0 \n" ::"i" ( portSVC_YIELD ) : "memory" )
#define portYIELD_WITHIN_API() \
{ \
/* Set a PendSV to request a context switch. */ \
portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; \
\
/* Barriers are normally not required but do ensure the code is completely \
* within the specified behaviour for the architecture. */ \
__asm volatile ( "dsb" ::: "memory" ); \
__asm volatile ( "isb" ); \
}
#define portNVIC_INT_CTRL_REG ( *( ( volatile uint32_t * ) 0xe000ed04 ) )
#define portNVIC_PENDSVSET_BIT ( 1UL << 28UL )
#define portEND_SWITCHING_ISR( xSwitchRequired ) \
do \
{ \
if( xSwitchRequired ) \
{ \
traceISR_EXIT_TO_SCHEDULER(); \
portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; \
} \
else \
{ \
traceISR_EXIT(); \
} \
} while( 0 )
#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
/*-----------------------------------------------------------*/
/* Critical section management. */
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortRaiseBASEPRI()
#define portCLEAR_INTERRUPT_MASK_FROM_ISR( x ) vPortSetBASEPRI( x )
#define portDISABLE_INTERRUPTS() vPortRaiseBASEPRI()
#define portENABLE_INTERRUPTS() vPortSetBASEPRI( 0 )
#define portENTER_CRITICAL() vPortEnterCritical()
#define portEXIT_CRITICAL() vPortExitCritical()
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. These are
* not necessary for to use this port. They are defined so the common demo files
* (which build with all the ports) will build. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
/*-----------------------------------------------------------*/
/* Architecture specific optimisations. */
#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
#endif
#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
/* Generic helper function. */
__attribute__( ( always_inline ) ) static inline uint8_t ucPortCountLeadingZeros( uint32_t ulBitmap )
{
uint8_t ucReturn;
__asm volatile ( "clz %0, %1" : "=r" ( ucReturn ) : "r" ( ulBitmap ) : "memory" );
return ucReturn;
}
/* Check the configuration. */
#if ( configMAX_PRIORITIES > 32 )
#error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.
#endif
/* Store/clear the ready priorities in a bit map. */
#define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
#define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )
/*-----------------------------------------------------------*/
#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - ( uint32_t ) ucPortCountLeadingZeros( ( uxReadyPriorities ) ) )
#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
/*-----------------------------------------------------------*/
#if ( configASSERT_DEFINED == 1 )
void vPortValidateInterruptPriority( void );
#define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() vPortValidateInterruptPriority()
#endif
/* portNOP() is not required by this port. */
#define portNOP()
#define portINLINE __inline
#ifndef portFORCE_INLINE
#define portFORCE_INLINE inline __attribute__( ( always_inline ) )
#endif
/*-----------------------------------------------------------*/
extern BaseType_t xIsPrivileged( void );
extern void vResetPrivilege( void );
extern void vPortSwitchToUserMode( void );
/**
* @brief Checks whether or not the processor is privileged.
*
* @return 1 if the processor is already privileged, 0 otherwise.
*/
#define portIS_PRIVILEGED() xIsPrivileged()
/**
* @brief Raise an SVC request to raise privilege.
*/
#define portRAISE_PRIVILEGE() __asm volatile ( "svc %0 \n" ::"i" ( portSVC_RAISE_PRIVILEGE ) : "memory" );
/**
* @brief Lowers the privilege level by setting the bit 0 of the CONTROL
* register.
*/
#define portRESET_PRIVILEGE() vResetPrivilege()
/**
* @brief Make a task unprivileged.
*
* It must be called from privileged tasks only. Calling it from unprivileged
* task will result in a memory protection fault.
*/
#define portSWITCH_TO_USER_MODE() vPortSwitchToUserMode()
/*-----------------------------------------------------------*/
extern BaseType_t xPortIsTaskPrivileged( void );
/**
* @brief Checks whether or not the calling task is privileged.
*
* @return pdTRUE if the calling task is privileged, pdFALSE otherwise.
*/
#define portIS_TASK_PRIVILEGED() xPortIsTaskPrivileged()
/*-----------------------------------------------------------*/
portFORCE_INLINE static BaseType_t xPortIsInsideInterrupt( void )
{
uint32_t ulCurrentInterrupt;
BaseType_t xReturn;
/* Obtain the number of the currently executing interrupt. */
__asm volatile ( "mrs %0, ipsr" : "=r" ( ulCurrentInterrupt )::"memory" );
if( ulCurrentInterrupt == 0 )
{
xReturn = pdFALSE;
}
else
{
xReturn = pdTRUE;
}
return xReturn;
}
/*-----------------------------------------------------------*/
portFORCE_INLINE static void vPortRaiseBASEPRI( void )
{
uint32_t ulNewBASEPRI;
__asm volatile
(
" mov %0, %1 \n" \
" msr basepri, %0 \n" \
" isb \n" \
" dsb \n" \
: "=r" ( ulNewBASEPRI ) : "i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) : "memory"
);
}
/*-----------------------------------------------------------*/
portFORCE_INLINE static uint32_t ulPortRaiseBASEPRI( void )
{
uint32_t ulOriginalBASEPRI, ulNewBASEPRI;
__asm volatile
(
" mrs %0, basepri \n" \
" mov %1, %2 \n" \
" msr basepri, %1 \n" \
" isb \n" \
" dsb \n" \
: "=r" ( ulOriginalBASEPRI ), "=r" ( ulNewBASEPRI ) : "i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) : "memory"
);
/* This return will not be reached but is necessary to prevent compiler
* warnings. */
return ulOriginalBASEPRI;
}
/*-----------------------------------------------------------*/
portFORCE_INLINE static void vPortSetBASEPRI( uint32_t ulNewMaskValue )
{
__asm volatile
(
" msr basepri, %0 " ::"r" ( ulNewMaskValue ) : "memory"
);
}
/*-----------------------------------------------------------*/
#define portMEMORY_BARRIER() __asm volatile ( "" ::: "memory" )
#ifndef configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY
#warning "configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY is not defined. We recommend defining it to 1 in FreeRTOSConfig.h for better security. *www.FreeRTOS.org/FreeRTOS-V10.3.x.html"
#define configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY 0
#endif
/*-----------------------------------------------------------*/
/* *INDENT-OFF* */
#ifdef __cplusplus
}
#endif
/* *INDENT-ON* */
#endif /* PORTMACRO_H */
Reference in New Issue View Git Blame Copy Permalink