epagris/FreeRTOS-Kernel
1
0
Fork 1
mirror of https://github.com/FreeRTOS/FreeRTOS-Kernel.git synced 2025-11-04 11:09:01 +01:00
Code Issues Packages Projects Releases Wiki Activity
FreeRTOS-Kernel/portable/GCC/RISC-V/portmacro.h

207 lines
8.5 KiB
C
Raw Blame History

/*
* FreeRTOS Kernel <DEVELOPMENT BRANCH>
* Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* SPDX-License-Identifier: MIT
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
/* *INDENT-OFF* */
#ifdef __cplusplus
extern "C" {
#endif
/* *INDENT-ON* */
/*-----------------------------------------------------------
* Port specific definitions.
*
* The settings in this file configure FreeRTOS correctly for the
* given hardware and compiler.
*
* These settings should not be altered.
*-----------------------------------------------------------
*/
/* Type definitions. */
#if __riscv_xlen == 64
#define portSTACK_TYPE uint64_t
#define portBASE_TYPE int64_t
#define portUBASE_TYPE uint64_t
#define portMAX_DELAY ( TickType_t ) 0xffffffffffffffffUL
#define portPOINTER_SIZE_TYPE uint64_t
#elif __riscv_xlen == 32
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE int32_t
#define portUBASE_TYPE uint32_t
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#else /* if __riscv_xlen == 64 */
#error "Assembler did not define __riscv_xlen"
#endif /* if __riscv_xlen == 64 */
typedef portSTACK_TYPE StackType_t;
typedef portBASE_TYPE BaseType_t;
typedef portUBASE_TYPE UBaseType_t;
typedef portUBASE_TYPE TickType_t;
/* Legacy type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
* not need to be guarded with a critical section. */
#define portTICK_TYPE_IS_ATOMIC 1
/*-----------------------------------------------------------*/
/* Architecture specifics. */
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#ifdef __riscv_32e
#define portBYTE_ALIGNMENT 8 /* RV32E uses RISC-V EABI with reduced stack alignment requirements */
#else
#define portBYTE_ALIGNMENT 16
#endif
/*-----------------------------------------------------------*/
/* Scheduler utilities. */
extern void vTaskSwitchContext( void );
#define portYIELD() __asm volatile ( "ecall" );
#define portEND_SWITCHING_ISR( xSwitchRequired ) \
do \
{ \
if( xSwitchRequired != pdFALSE ) \
{ \
traceISR_EXIT_TO_SCHEDULER(); \
vTaskSwitchContext(); \
} \
else \
{ \
traceISR_EXIT(); \
} \
} while( 0 )
#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
/*-----------------------------------------------------------*/
/* Critical section management. */
#define portCRITICAL_NESTING_IN_TCB 0
#define portDISABLE_INTERRUPTS() __asm volatile ( "csrc mstatus, 8" )
#define portENABLE_INTERRUPTS() __asm volatile ( "csrs mstatus, 8" )
extern size_t xCriticalNesting;
#define portENTER_CRITICAL() \
{ \
portDISABLE_INTERRUPTS(); \
xCriticalNesting++; \
}
#define portEXIT_CRITICAL() \
{ \
xCriticalNesting--; \
if( xCriticalNesting == 0 ) \
{ \
portENABLE_INTERRUPTS(); \
} \
}
/*-----------------------------------------------------------*/
/* Architecture specific optimisations. */
#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
#endif
#if ( configUSE_PORT_OPTIMISED_TASK_SELECTION == 1 )
/* Check the configuration. */
#if ( configMAX_PRIORITIES > 32 )
#error "configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice."
#endif
/* Store/clear the ready priorities in a bit map. */
#define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
#define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )
/*-----------------------------------------------------------*/
#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - __builtin_clz( uxReadyPriorities ) )
#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. These are
* not necessary for to use this port. They are defined so the common demo
* files (which build with all the ports) will build. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
/*-----------------------------------------------------------*/
#define portNOP() __asm volatile ( " nop " )
#define portINLINE __inline
#ifndef portFORCE_INLINE
#define portFORCE_INLINE inline __attribute__( ( always_inline ) )
#endif
#define portMEMORY_BARRIER() __asm volatile ( "" ::: "memory" )
/*-----------------------------------------------------------*/
/* configCLINT_BASE_ADDRESS is a legacy definition that was replaced by the
* configMTIME_BASE_ADDRESS and configMTIMECMP_BASE_ADDRESS definitions. For
* backward compatibility derive the newer definitions from the old if the old
* definition is found. */
#if defined( configCLINT_BASE_ADDRESS ) && !defined( configMTIME_BASE_ADDRESS ) && ( configCLINT_BASE_ADDRESS == 0 )
/* Legacy case where configCLINT_BASE_ADDRESS was defined as 0 to indicate
* there was no CLINT. Equivalent now is to set the MTIME and MTIMECMP
* addresses to 0. */
#define configMTIME_BASE_ADDRESS ( 0 )
#define configMTIMECMP_BASE_ADDRESS ( 0 )
#elif defined( configCLINT_BASE_ADDRESS ) && !defined( configMTIME_BASE_ADDRESS )
/* Legacy case where configCLINT_BASE_ADDRESS was set to the base address of
* the CLINT. Equivalent now is to derive the MTIME and MTIMECMP addresses
* from the CLINT address. */
#define configMTIME_BASE_ADDRESS ( ( configCLINT_BASE_ADDRESS ) + 0xBFF8UL )
#define configMTIMECMP_BASE_ADDRESS ( ( configCLINT_BASE_ADDRESS ) + 0x4000UL )
#elif !defined( configMTIME_BASE_ADDRESS ) || !defined( configMTIMECMP_BASE_ADDRESS )
#error "configMTIME_BASE_ADDRESS and configMTIMECMP_BASE_ADDRESS must be defined in FreeRTOSConfig.h. Set them to zero if there is no MTIME (machine time) clock. See www.FreeRTOS.org/Using-FreeRTOS-on-RISC-V.html"
#endif /* if defined( configCLINT_BASE_ADDRESS ) && !defined( configMTIME_BASE_ADDRESS ) && ( configCLINT_BASE_ADDRESS == 0 ) */
/* *INDENT-OFF* */
#ifdef __cplusplus
}
#endif
/* *INDENT-ON* */
#endif /* PORTMACRO_H */
Reference in New Issue View Git Blame Copy Permalink