diff --git a/CMakeLists.txt b/CMakeLists.txt index 9999691..c91366a 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -9,7 +9,7 @@ include("cmake/gcc-arm-none-eabi.cmake") message("Build CMAKE_MODULE_PATH: " ${CMAKE_MODULE_PATH}) # Core project settings -project(bszfl_ethernet) +project(flexptp-demo) enable_language(C CXX ASM) message("Build type: " ${CMAKE_BUILD_TYPE}) diff --git a/Drivers/EthDrv/mac_drv.c b/Drivers/EthDrv/mac_drv.c index 4a64121..a8cf638 100644 --- a/Drivers/EthDrv/mac_drv.c +++ b/Drivers/EthDrv/mac_drv.c @@ -36,6 +36,7 @@ static void ETHHW_InitClocks() { RMII_MII_TX_EN --------------------> PG11 RMII_MII_TXD0 ---------------------> PG13 RMII_MII_TXD1 ---------------------> PB13 + PPS_OUT ---------------------------> PB5 */ /* Configure PA1, PA2 and PA7 */ @@ -46,8 +47,8 @@ static void ETHHW_InitClocks() { GPIO_InitStructure.Pin = GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_7; HAL_GPIO_Init(GPIOA, &GPIO_InitStructure); - /* Configure PB13 */ - GPIO_InitStructure.Pin = GPIO_PIN_13; + /* Configure PB5 and PB13 */ + GPIO_InitStructure.Pin = GPIO_PIN_5 | GPIO_PIN_13; HAL_GPIO_Init(GPIOB, &GPIO_InitStructure); /* Configure PC1, PC4 and PC5 */ diff --git a/Inc/stm32h7xx_hal_conf.h b/Inc/stm32h7xx_hal_conf.h index 4846dee..ed7bc0a 100644 --- a/Inc/stm32h7xx_hal_conf.h +++ b/Inc/stm32h7xx_hal_conf.h @@ -107,7 +107,7 @@ * (when HSE is used as system clock source, directly or through the PLL). */ #if !defined (HSE_VALUE) -#define HSE_VALUE (8000000UL) /*!< Value of the External oscillator in Hz */ +#define HSE_VALUE (2 * 8000000UL) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ #if !defined (HSE_STARTUP_TIMEOUT) diff --git a/LICENSE b/LICENSE new file mode 100644 index 0000000..0b6be49 --- /dev/null +++ b/LICENSE @@ -0,0 +1,21 @@ +MIT License + +Copyright (c) 2021 András Wiesner + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. \ No newline at end of file diff --git a/Modules/flexptp b/Modules/flexptp index f9aca67..38614b7 160000 --- a/Modules/flexptp +++ b/Modules/flexptp @@ -1 +1 @@ -Subproject commit f9aca6757d6179af296cff2344607448f65f5bc2 +Subproject commit 38614b719446f62a7e1d210a994755b88e30fdbf diff --git a/NUCLEO-H743ZI.gif b/NUCLEO-H743ZI.gif new file mode 100644 index 0000000..4b6b95e Binary files /dev/null and b/NUCLEO-H743ZI.gif differ diff --git a/README.md b/README.md new file mode 100644 index 0000000..fec1b08 --- /dev/null +++ b/README.md @@ -0,0 +1,198 @@ +# STM32 NUCLEO-H743ZI flexPTP demo + + + +![flexPTP CLI](NUCLEO-H743ZI.gif) + +## What's this? + +> **This is a [flexPTP](https://github.com/epagris/flexPTP) demo project showcasing the capabilities of the flexPTP [IEEE 1588 Precision Time Protocol](https://ieeexplore.ieee.org/document/9120376) implementation for the [STMicroelectronics NUCLEO-H743ZI](https://www.st.com/en/evaluation-tools/nucleo-h743zi.html) devboard.** + +Still not clear what is it useful for? No worries, it's a behind-the-scenes support technology that use unaware every day if you have a smartphone or when you are connected to the internet. Modern telecommunication and measurement systems often rely on precise time synchronization down to the nanoseconds' scale. Methods got standardized by the IEEE and now it's known by the name of the Precision Time Protocol. This software project is an evaluation environment to showcase the capabilities of our IEEE 1588 PTP implementation named `flexPTP` on the STMicroelectronics NUCLEO-H743ZI board. + +> [!TIP] +>**Just want to try the demo and skip compiling? Download one of the precompiled binaries and jump to [Deploying](#deploying)!** + + +### Get the sources + +> [!NOTE] +> To acquire the full source tree after cloning the repo, please fetch the linked *submodules* as well: + +``` +git clone https://gitea.epagris.com/epagris/flexPTP-demo-NUCLEO-H743ZI2.git +cd flexPTP-demo-NUCLEO-H743ZI2 +git submodule init +git submodule update +``` + +## Building + +### Prerequisites + +The following two pieces of software are necessary for building: +- `arm-none-eabi-gcc` (v12+): the GCC ARM Cortex-M C cross-compiler +- `cmake` (v3.22+): KitWare's build management system + +> [!NOTE] +> Both applications are available on common Linux systems through the official package repository. For building on Windows we recommend to install the [STM32CubeCLT](https://www.st.com/en/development-tools/stm32cubeclt.html) bundle shipping the `arm-none-eabi-{gcc|gdb}`, `openocd` and ST's proprietary STLink downloading tools. The [CMake](https://cmake.org/) needs to be installed separately. + +### Compiling + +The project is fully CMake managed. Configure and invoke the cross-compiler using the commands below: + +``` +cmake . -B build +cmake --build build --target flexptp-demo -- +``` +Once the building has concluded the output binaries would be deposited in the `build` directory: `flexptp-demo.elf`, `flexptp-demo.bin`, `flexptp-demo.hex` + +## Deploying + +### Downloading the firmware + +The compiled binaries can be downloaded onto the devboard through several tools: + +### Using the STM32CubeProgrammer + +The [STM32CubeProgrammer](https://www.st.com/en/development-tools/stm32cubeprog.html) recognizes the MCU once connected. Any of the generated binary output can be used for programming on the *Erasing & Programming* pane. + +### Using the `st-flash` utility + +This tool is part of the open source [stlink-tools](https://github.com/stlink-org/stlink) bundle, that is also available through common Linux package managers. + +To program the MCU use the following command: `st-flash write build/flexptp-demo.bin 0x08000000` + +### Using the `openocd` application + +The [OpenOCD](https://openocd.org/) programming/debugging tool can also be used to upload the firmware using the following command: + +`openocd -f "board/st_nucleo_h743zi.cfg" -c init -c halt -c "program build/flexptp-demo.elf" -c exit` + +OpenOCD is also available through the common Linux package managers. + +### Interacting with the firmware + +The firmware prints its messages to and expect user input coming on the board controller's virtual serial port using the `115200-8-N-1` configuration. Use [Putty](https://www.putty.org/) or any equivalent (e.g. GtkTerm) serial port terminal to communicate with the firmware. On Linux, the device will show up as `/dev/ttyACMx`. + +> [!NOTE] +> Read the firmware's bootup hints and messages carefully! + +### PPS signal + +The 1PPS signal is emitted on the `PB5` pin. + +## Development + +An all-around [Visual Studio Code](https://code.visualstudio.com/) project is packaged along the project to enable easy development, debugging and editing. To enable these powerful features, install the [STM32Cube for Visual Studio Code](https://marketplace.visualstudio.com/items?itemName=stmicroelectronics.stm32-vscode-extension), [CMakeTools](https://marketplace.visualstudio.com/items?itemName=ms-vscode.cmake-tools), [Cortex-Debug](https://marketplace.visualstudio.com/items?itemName=marus25.cortex-debug), [Embedded Tools](https://marketplace.visualstudio.com/items?itemName=ms-vscode.vscode-embedded-tools) extensions, [OpenOCD](https://openocd.org/) and the [STM32CubeCLT](https://www.st.com/en/development-tools/stm32cubeclt.html) software package. The latter one is required for downloading the firmware right away using the Cortex-Debug extension (if not done through OpenOCD) and for providing the Embedded Tools extension with register description `.SVD` files. [clangd](https://marketplace.visualstudio.com/items?itemName=llvm-vs-code-extensions.vscode-clangd) and clang-format are highly recommended. + +Thas project has predefined *Launch* and *Attach* tasks. + +### Software structure + +The project is relying on the following large software building blocks: +- the [FreeRTOS](https://www.freertos.org/) embedded operating system, +- the [CMSIS RTOS V2](https://arm-software.github.io/CMSIS_6/latest/RTOS2/index.html) module as a wrapper for FreeRTOS, +- [STM32H7xx Hardware Abstraction Layer library](https://github.com/STMicroelectronics/stm32h7xx-hal-driver) (HAL) providing MCU specific functionality, +- the [Lightweight IP](https://github.com/lwip-tcpip/lwip) (lwip) Ethernet stack extended with PTP timestamp support, +- the [EtherLib](https://gitea.epagris.com/epagris/EtherLib), our in-house developed Ethernet stack, +- the [embfmt](https://gitea.epagris.com/epagris/embfmt) a printf()-like formatted printer implementation for embedded systems. + +> [!TIP] +> The project can either use LwIP or EtherLib Ethernet stacks. This can be easily changed by setting the `ETH_STACK` CMake variable in the top `CMakeLists.txt`: +> ``` +>set(ETH_STACK "LWIP") # select "LWIP" or "ETHERLIB" +>``` +> The development of the EtherLib network stack was motivated in the beginning by just curiosity and our need for something that is suitable for our university research. Gradually it became a handy tool so we've decided to promote it into our public projects as well. +> + +The project is organized the following way: + +``` +ROOT + Drivers + CMSIS: ARM CMSIS-related files (CMSIS RTOS V2 and device headers) + EthDrv: a custom Ethernet driver (with PTP timestamp support), a PHY-interface and network stack interfaces + stm32h7xx-hal-driver: ST's STM32H7xx HAL driver files (submodule) + Inc: headers for compile-time library configuration + Middlewares: FreeRTOS CMake configuration + Modules + flexptp: our PTP implementation (submodule) + lwip and lwip_port: the LwIP Ethernet stack and its system dependent module (submodule) + etherlib: our in-house developed Ethernet stack (submodule) + embfmt: a printf()-like formatted printer implementation for embedded systems (submodule) + blocking_io: a simple blocking FIFO implementation + Src + cliutils: CLI-interface implementation + ethernet: Ethernet stack initialization + + cmds.c: custom CLI commands +``` +> [!NOTE] +> The flexPTP parameters are defined in the [flexptp_options.h](Inc/flexptp_options.h) header. + +### Printing and logging + +In this project the memory-heavy `printf()` is replaced by the more embedded-optimized `MSG()` function backed by the `embfmt` library. Parameters and format specifiers are fully `printf()` compatible. + +### CLI commands + +The software offers you with the following multitude, most flexPTP-related of commands: + +``` +? Print this help (22/48) +hist Print command history +osinfo Print OS-related information +flexptp Start flexPTP daemon +ptp pps {freq} Set or query PPS signal frequency [Hz] +ptp servo params [Kp Kd] Set or query K_p and K_d servo parameters +ptp servo log internals {on|off} Enable or disable logging of servo internals +ptp reset Reset PTP subsystem +ptp servo offset [offset_ns] Set or query clock offset +ptp log {def|corr|ts|info|locked|bmca} {on|off} Turn on or off logging +time [ns] Print time +ptp master [[un]prefer] [clockid] Master clock settings +ptp info Print PTP info +ptp domain [domain] Print or get PTP domain +ptp addend [addend] Print or set addend +ptp transport [{ipv4|802.3}] Set or get PTP transport layer +ptp delmech [{e2e|p2p}] Set or get PTP delay mechanism +ptp transpec [{def|gPTP}] Set or get PTP transportSpecific field (majorSdoId) +ptp profile [preset []] Print or set PTP profile, or list available presets +ptp tlv [preset [name]|unload] Print or set TLV-chain, or list available TLV presets +ptp pflags [] Print or set profile flags +ptp period [|matched] Print or set log. periods +ptp coarse [threshold] Print or set coarse correction threshold +ptp priority [ ] Print or set clock priority fields +``` + +> [!TIP] +> The above hint can be listed by typing '?'. + +## Notes + +> [!WARNING] +> By default, the MCU clock is sourced by the onboard (STLink) board controller on this devboard. According to our observations, this clock signal is loaded with heavy noise rendering the clock synchronization unable to settle precisely. We highly recommend to solder a 8 MHz oscillator onto the designated X3 pads to achieve the best results! + + +## Related papers and references + +[Time Synchronization Extension for the IO-Link Industrial Communication Protocol](https://ieeexplore.ieee.org/document/10747727) + +[Distributed Measurement System for Performance Evaluation of Embedded Clock Synchronization Solutions](https://ieeexplore.ieee.org/document/9805958/) + +[Portable, PTP-based Clock Synchronization Implementation for Microcontroller-based Systems and its Performance Evaluation](https://ieeexplore.ieee.org/document/9615250) + +[Synchronization of Sampling in a Distributed Audio Frequency Range Data Acquisition System Utilizing Microcontrollers](https://ieeexplore.ieee.org/document/9918455/) + +[Methods of Peripheral Synchronization in Real-Time Cyber-Physical Systems](https://ieeexplore.ieee.org/document/10178979/) + + + +## License + +The project is created by András Wiesner (Epagris) in 2025 and published under the MIT license. Contributions are welcome! :) + + +